|
 These collets are used on Miyakawa multiple spindle heads. I don't know if they have other applications or not.
There are 4 collet sizes 4, 6, 10 & 13 (see drawing and table below)
There are at least 6 "types" of Miyakawa collets. (see table below)
Check Price & Availability
Size |
H (hex) |
L |
Thread |
4 |
8mm (5/16") |
30mm (1-3/16") |
? |
6 |
10mm (25/64" |
36mm (1-3/8") |
M10x1.0 |
10 |
17mm (43/64" |
48mm (1-57/64") |
M15x1.0 |
13 |
19mm (3/4") |
53mm (2-3/32") |
? |
Type |
Description |
Size 4 |
Size 6 |
Size 10 |
Size 13 |
CT |
Tap Collet with depth set screw |
1/8 to 5/32" |
1/16 to 1/4" |
1/16 to 1/2" |
1/16 to 5/8" |
CD |
Drill collet with depth set screw
every 0.1mm inside diameter. |
0.8 to 4mm
1/32 to 5/32" |
0.8 to 6mm
1/32 to 15/64" |
2 to 10mm
5/64 to 25/64" |
3 to 13mm
1/8 to 1/2" |
CDS |
Drill collet with depth set screw |
~ |
1 to 6mm
1/32 to 15/64" |
2 to 10mm
5/64 to 25/64" |
3 to 13mm
1/8 to 1/2" |
CTF |
Tap collet with a rubber ring
for holding a tap and with no split |
~ |
M4 to M5.5
1/16" to 3/16" |
M4 to M8
1/16 to 1/4" |
M5 to M12
1/16 to 5/16" |
CR |
Reamer collet for straight shank reamer.(JIS) |
5.5 to 4mm
7/64 to 5/32" |
2.5 to 6mm
7/64 to 15/64" |
2.5 to 10mm
7/64 to 25/64" |
3.5 to 12mm
9/64 to 15/32" |
CS |
Stub drill collet with depth set screw |
~ |
2.5 to 6mm
7/64 to 15/64" |
2.5 to 10mm
7/64 to 25/64" |
3.5 to 12mm
9/64 to 15/32" |
Note:
The specifications and information provided on this page are intended for part identification purposes only.
Although we believe them to be correct, dimensions should not be used for part construction or inspection.
|
How to Buy
Inventory Index